Boat Shipping Calculator
Updated November 18, 202610 min read

How to Ship a Boat to Hawaii: Ports, Methods, Costs and Prep

To ship a boat to Hawaii, truck it to a West Coast port, then send it about 2,200 nautical miles by RoRo, container or flat rack. Ports, costs, prep and timing.

There is no road to Hawaii, so every boat from the mainland goes by sea. In practice that means two legs: a truck haul to a West Coast port such as Los Angeles/Long Beach or Oakland, then about 2,200 nautical miles of ocean freight by RoRo, container, flat rack or LoLo. A capable, well-found sailboat with an experienced crew can also make the passage under sail. It is a domestic move, so there is no customs entry or import duty, but Hawaii use tax may apply if you register the boat there. Price the ocean leg with our international shipping calculator (choose "US West Coast → Hawaii"), then add trucking to and from the port.

Below: which ports to use, how to choose a method, what makes up the cost, what to sort out on the Hawaii side, and how to prepare.

Why Hawaii is ocean-only

Every overland quote on this site is built on road miles. From the mainland to Hawaii, that route doesn't exist. That's why our Honolulu boat transport page shows no truck estimates to mainland cities — it explains ocean freight instead.

The overland calculator still matters for two parts of the move:

  • The mainland leg: trucking your boat from home or a marina to the West Coast port.
  • The island leg: trucking on the island itself, for example from the port or a storage yard to a marina.

Moves between the islands go by inter-island barge.

The route: mainland port to Hawaii

LegHow it movesHow it's priced
Home or marina → West Coast portTruckPer mile, by boat size, plus permits if the beam is over 8'6"
West Coast port → HawaiiShip (RoRo, container, flat rack or LoLo)By volume (CBM) or by length, plus port and cradle charges
Hawaii port → marina or storageTruck on the islandShort local haul, plus launch fees
Island to island (if needed)Inter-island bargeQuoted by the barge operator

West Coast ports. Los Angeles/Long Beach and Oakland are the usual departure points. Pick the port with a sailing that suits your boat and schedule, then work out the truck leg from there. If you're already in the West, the truck leg may be short; from the East Coast or the Midwest it can be the bigger bill.

Arrival. Honolulu, on Oahu, is the usual arrival port. Our directory lists Ala Wai Small Boat Harbor — the largest small boat harbor in the Hawaiian Islands — and Ko Olina Marina, both on Oahu. Arrange a slip or a storage spot before the boat sails.

Choosing a method

RoRo (roll-on/roll-off)

The boat stays on its trailer, or sits on a steel cradle, and is towed up the ship's ramp into a covered vehicle deck. No crane lifts the hull. For a trailerable boat this is often the simplest and cheapest ocean option. The trailer has to be road-worthy: good tires with no sidewall dry-rot and freshly packed wheel bearings. Our RoRo shipping rates guide explains how RoRo is priced.

Container

A boat narrower than 7'8" and lower than 7'10" can be cradled inside a 40 ft container. It's well protected and relatively cheap, but windshields, consoles and anything else that sticks up may need to come off to fit. Our calculator caps a 40 ft container at 38 ft of boat and a 20 ft container at 19 ft.

Flat rack

An open-sided container base for boats too wide or tall for a closed box. The boat rides on a custom cradle on an open deck, exposed to weather and salt spray, so heavy-duty shrink wrap is standard. Our calculator takes flat-rack boats up to 55 ft.

LoLo (lift-on/lift-off)

The boat is craned onto the deck or into the hold. It's the answer for larger boats that can't be trailered, and it brings cradle and crane fees with it. For yachts, our guide to yacht transport by sea compares LoLo with float-on/float-off yacht carriers.

Sailing it there

A seaworthy cruising sailboat with an experienced offshore crew can sail to Hawaii. Ala Wai Small Boat Harbor is the finish line of the biennial Transpac race from Los Angeles, so the passage is well known. But it's a true ocean crossing with no harbor to duck into, not a coastal hop. Only a properly equipped boat and crew should attempt it. If you hire a delivery captain, the day rate — typically $400 to $800 a day, plus provisions and the crew's travel — runs for the whole passage, including any days spent waiting for weather. Powerboats are a different matter: for almost all of them the range and fuel make ocean freight the realistic choice. See our captained delivery guide for how delivery crews charge.

Quick guide to choosing:

Your boatUsually the best way to Hawaii
Small boat under 7'8" beam that fits in a boxContainer
Trailerable boat on a road-worthy trailerRoRo
Wide or tall boat with no trailerRoRo on a cradle, flat rack or LoLo
Large yachtLoLo or a yacht carrier, if one serves the route
Offshore-capable sailboat with an experienced crewSail it, or ship it as above

What it costs

The site doesn't publish a single Hawaii rate, because the ocean leg depends on the method, your boat's size and the sailing. What the total is made of:

  1. Truck to the West Coast port. Priced per mile by boat size, like any overland haul. Boats wider than 8'6" need an oversize permit in every state crossed, typically $50 to $250 each, and past 12 ft most states also require a pilot car. Run this leg through the boat transport cost calculator.
  2. Ocean freight. RoRo and LoLo are priced by volume — length × width × height in cubic meters (CBM) — or by length. Every antenna, T-top and outboard adds to the volume, so lowering or removing them saves money.
  3. Port charges. Terminal handling at both ends. Our calculator uses $850 for origin and destination handling combined.
  4. Cradle or blocking. Needed for boats without a trailer, and for container and flat-rack loads.
  5. Beam surcharge. Our calculator adds $200 per foot of beam over 8.5 ft.
  6. Marine cargo insurance. About 1.5% to 2.5% of the boat's value. Our calculator uses 1.5%, with a $500 minimum.
  7. Island leg and launch. Trucking from the port to the marina, plus the marina's launch or lift fee — marinas generally charge $8 to $22 per foot to lift a boat in or out.

What you won't pay: customs duty, import tax or a customs broker. Mainland to Hawaii is a domestic move. Hawaii use tax may apply if the boat is newly registered in Hawaii, so ask the state about it before you ship.

Hawaii-side requirements

Rules change, and this guide doesn't replace the state's own guidance. In general, expect to deal with:

  • Registration. If the boat will be kept in Hawaii, it will need to be registered there. Boat registration in Hawaii is handled by the Hawaii Department of Land and Natural Resources (DLNR), Division of Boating and Ocean Recreation. Confirm current requirements, fees and timing with them.
  • Use tax. Hawaii use tax may apply to a boat newly registered in the state. Confirm with the state before you ship so it isn't a surprise.
  • Clean hull. Hawaii is protective of its waters against invasive species. Ship the boat with a clean, fouling-free hull, a dry bilge and no standing water, and ask DLNR and your carrier whether any inspection or cleaning is required on arrival.
  • Slip or storage. Harbor slips can be hard to get. Line up a slip, mooring or dry storage before the boat leaves the mainland.

The ocean carrier will have its own paperwork. Expect to show the title or registration and proof of ownership at the port.

Preparing your boat for the crossing

Ocean freight asks more of the boat than a truck does:

  • Fuel: under a quarter tank.
  • Tanks and bilges: drained and flushed — bilge, livewells and holding tanks.
  • Batteries: disconnected.
  • Loose gear: removed. Ocean carriers accept no liability for items left aboard, and RoRo boats often sit in open staging lots before loading.
  • Height and volume: lower or remove arches, antennas, radar domes and biminis; on a sailboat, the mast usually has to come down for a container or RoRo.
  • Protection: shrink wrap for deck cargo. Commercial marine shrink wrap costs $18 to $30 per linear foot.
  • Trailer: if it's going RoRo, the trailer has to be fit for the road — tires, bearings and lights.
  • Photos: document the boat's condition from every side before handing it over.

Use our boat prep checklist and our guide to preparing your boat for shipping.

Timelines

The site doesn't publish a fixed transit time for the Hawaii crossing. Plan around three pieces:

  • Truck to the port: about one day per 500 miles once the boat is loaded. A coast-to-coast haul takes 6 to 10 days. See how long it takes to ship a boat.
  • Port staging: boats usually have to be delivered to the terminal before the sailing date. Ask the carrier how early.
  • Ocean passage and release: ask the carrier for its sailing schedule and the expected arrival and release date in Hawaii.

Book the ship first, then schedule the truck to meet the delivery deadline at the port. Under sail, the passage time depends on the boat and the weather; leave room in the plan to wait for a good weather window.

Step by step

  1. Measure the boat — length overall, the widest beam including rub rails, and height on its trailer. Check it with our transport size calculator.
  2. Choose a method — container, RoRo, flat rack, LoLo or sailing.
  3. Estimate the ocean leg in the international shipping calculator and the truck leg in the boat transport cost calculator.
  4. Get written quotes that list freight, port charges, cradles and insurance separately. You can request a quote with your boat's details.
  5. Arrange the Hawaii end — slip or storage, registration and any use tax.
  6. Prepare the boat and deliver it to the port before the cutoff.

Frequently asked questions

Can I drive or tow my boat to Hawaii? No. There is no road route. The boat crosses the Pacific on a ship, or under its own sail with a capable crew.

Do I pay customs duty to ship a boat to Hawaii? No. Mainland to Hawaii is a domestic move — no customs entry, duty or import tax. Hawaii use tax may apply if the boat is newly registered there.

Which West Coast port should I ship from? Los Angeles/Long Beach and Oakland are the usual choices. The best one is usually whichever has a suitable sailing for your boat and the shortest, cheapest truck leg from where the boat is now.

How do I move a boat between Hawaiian islands? By inter-island barge. Trucking on a single island, such as from the port to a marina, can be estimated with our overland calculator.

Can I ship my boat to Hawaii in a container? Yes, if it fits: under 7'8" of beam and 7'10" of height for a 40 ft container. Otherwise use RoRo, a flat rack or LoLo.

Ready to run the numbers?

Get your result instantly — private, in your browser.

Open the calculator →